Freeze Frame Data And 1ST Trip Freeze Frame Data

Freeze frame data item * ¹	Description
DIAG TROUBLE CODE [PXXXX]	The engine control component part/control system has a trouble code displayed as PXXXX. (Refer to DTC INDEX .)
CAL/LD VALUE %]	The calculated load value at the moment a malfunction is detected is displayed.
COOLANT TEMP [°C]	The engine coolant temperature at the moment a malfunction is detected is displayed.
L-FUEL TRM-B1 %]	"Long-term fuel trim" at the moment a malfunction is detected is displayed. The long-term fuel trim indicates much more gradual feedback compensation to the base fuel schedule than short-term fuel trim.
L-FUEL TRM-B2 %]
S-FUEL TRM-B1 %]	"Short-term fuel trim" at the moment a malfunction is detected is displayed. The short-term fuel trim indicates dynamic or instantaneous feedback compensation to the base fuel schedule.
S-FUEL TRM-B2 %]
ENGINE SPEED [rpm]	The engine speed at the moment a malfunction is detected is displayed.
VEHICL SPEED [km/h] or [mph]	The vehicle speed at the moment a malfunction is detected is displayed.
ABSOL TH•P/S [%]	The throttle valve opening angle at the moment a malfunction is detected is displayed.
INJ PULSE [msec]	The basic injection quantity at the moment a malfunction is detected is displayed.
INT/A TEMP SE [°C] or [°F]	The intake air temperature at the moment a malfunction is detected is displayed.
FUEL SYS-B1	"Fuel injection system status" at the moment a malfunction is detected is displayed. One of the following mode is displayed. MODE 2: Open loop due to detected system malfunction MODE 3: Open loop due to driving conditions (power enrichment, deceleration enleanment) MODE 4: Closed loop - using oxygen sensor(s) as feedback for fuel control MODE 5: Open loop - has not yet satisfied condition to go to closed loop
FUEL SYS-B2
INT MANI PRES [kPa]	Constant value is displayed. These items are displayed but are not applicable to this model.
COMBUST CONDITION
FUEL RAIL PRESSURE [MPa]	The fuel rail pressure at the moment a malfunction is detected is displayed.
TARGET FUEL RAIL PRESSURE [MPa]	The target fuel rail pressure at the moment a malfunction is detected is displayed.
BATTERY VOLTAGE [V]	The battery voltage at the moment a malfunction is detected is displayed.
FUEL LEVEL [%]	The fuel level at the moment a malfunction is detected is displayed.

* 1: The items are the same as those of 1st trip freeze frame data.