LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2017 >> Sentra Nismo, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Security Control System (With Intelligent Key System) (DTCS)) >> DTC/Circuit Diagnosis >> DTC B2110: Shift Position/Clutch Interlock Switch >> DTC Logic >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

CVT MODELS

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Shift selector lever to the Park (P) position.
    2. Turn ignition switch ON and wait 1 second or more.
    3. Shift selector lever to the Neutral (N) position and wait 1 second or more.
    4. Shift selector lever to the position other than Park (P) and Neutral (N), and wait 1 second or more.
    5. Check DTC in Self Diagnostic Result mode of IPDM E/R using CONSULT.

    Is DTC detected?

    YES 

    Go to DIAGNOSIS PROCEDURE (CVT MODELS) .

    NO 

    Inspection End.

M/T MODELS

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Turn ignition switch ON and wait 1 second or more.
    2. Depress the clutch pedal and wait 1 second or more.
    3. Check DTC in "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT.

    Is DTC detected?

    YES 

    Go to DIAGNOSIS PROCEDURE (M/T MODELS) .

    NO 

    INSPECTION END

scientia non olet · About LEMON Manuals