DTC Detection Logic
WARNING: This page is about a different car, the 2016 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC B2604 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC
.
- If DTC B2604 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC LOGIC
.
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B2604 |
SHIFT PN DIAG CAN |
The following states are detected for 5 seconds while ignition switch is ON.
- P/N position signal is sent from transmission range switch but shift position signal input (CAN) from TCM is other than P and N
- P/N position signal is not sent from transmission range switch but shift position signal input (CAN) from TCM is P or N
|
|