LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2017 >> Sentra Nismo, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Security Control System (With Intelligent Key System) (DTCS)) >> DTC/Circuit Diagnosis >> DTC B2620: Park/Neutral Position Switch >> Component Inspection >> Diagnostic Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

WARNING: This page is about a different car, the 2016 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK PARK/NEUTRAL POSITION SWITCH

    1. Turn ignition switch OFF.
    2. Disconnect park/neutral position switch connector.
    3. Check continuity between park/neutral position switch terminals.
    Park/neutral position switch Condition Continuity
    Terminal
    2 3 Shift lever Neutral position Yes
    Except neutral position No

    Is the inspection result normal?

    YES 

    Inspection End

    NO 

    Replace park/neutral position switch. Refer to REMOVAL AND INSTALLATION (With 6MT: RS6F94R).

scientia non olet · About LEMON Manuals