LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2017 >> Sentra S, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System (With Intelligent Key System) (DTCS) >> DTC/Circuit Diagnosis >> DTC B20A0: Cranking Request Circuit >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

NOTE:

If DTC B20A0 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .

DTC No. CONSULT screen items
(Trouble diagnosis content)		 DTC detecting condition Possible cause
B20A0 STR CUT OFF SHORT
(Starter cut off short)		 When the following items do not match, a malfunction is detected.
  • Cranking request signal from ECM
  • Starter control relay control signal from ECM (CAN)
  • Harness or connectors

    (CAN communication line is open or shorted.)

  • Harness or connectors

    (Cranking request signal circuit is open or shorted.)

  • IPDM E/R
  • ECM

DTC CONFIRMATION PROCEDURE

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Perform DTC CONFIRMATION PROCEDURE for DTC P1650. Refer to DTC LOGIC .
    2. Turn ignition switch ON.
    3. Check DTC in Self Diagnostic Result mode of IPDM E/R using CONSULT.

    Is DTC detected?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO 

    Inspection End

scientia non olet · About LEMON Manuals