April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

CHECK SELF DIAGNOSTIC RESULT 1
1. Select Self Diagnostic Result mode of BCM using CONSULT.
2. Erase DTC.
3. Perform DTC CONFIRMATION PROCEDURE for DTC B2195. Refer to DTC LOGIC .
Is DTC detected?

YES

GO TO STEP 2 .

NO

Inspection End.

CHECK EQUIPMENT OF THE VEHICLE

Check that unspecified accessory part related to engine start is not installed.

Is unspecified accessory part related to engine start installed?

YES

GO TO STEP 3 .

NO

GO TO STEP 4 .

CHECK SELF DIAGNOSTIC RESULT 2
1. Obtain the customers approval to remove unspecified accessory part related to engine start, and then remove it.
2. Select Self Diagnostic Result of BCM using CONSULT.
3. Erase DTC.
4. Perform DTC CONFIRMATION PROCEDURE for DTC B2195. Refer to DTC LOGIC .
Is DTC detected?

YES

GO TO STEP 4 .

NO

Inspection End.

REPLACE BCM
1. Replace BCM. Refer to REMOVAL AND INSTALLATION .
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT.
Inspection End.