DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC PRIORITY

If DTC "C1A03" is displayed with DTC "U1000", first diagnose the DTC "U1000".

Is applicable DTC detected?

YES

Perform diagnosis of applicable.
- U1000: Refer to DTC LOGIC .
NO

GO TO STEP 2 .

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT
1. Start the engine.
2. Turn the MAIN switch of ICC system ON.
3. Drive the vehicle at 19 mph (30 km/h) or more.
  CAUTION:
  Always drive safely.
4. Stop the vehicle.
5. Select "All DTC Reading" mode.
6. Check if "C1A03" is detected as the current malfunction in "Self Diagnostic Result" mode of "ICC/ADAS".
Is "C1A03" detected as the current malfunction?

YES

Refer to DIAGNOSIS PROCEDURE .

NO - 1

To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

NO - 2

Confirmation after repair: Inspection End.