Fail Safe List

WARNING: This page is about a different variant/trim than selected.

* : Applicable - : Not applicable

DTC No.	Detected items	Vehicle behavior
		Pattern							Others
		A	B	C	D	E	F	G	Others
P0011 P0075 P052A P052B	Intake valve timing control	-	-	-	*	-	-	-	-
P0014 P0078	Exhaust valve timing control	-	-	-	*	-	-	-	-
P0046	Electric wastegate control actuator	*	*	-	*	-	-	-	The ECM stops the electric wastegate actuator control, engine can not be supercharged driving. The ECM regulates engine power limiter and EGR Off.
P0087 P0090	FRP control system	*	-	*	*	*	-	-	-
P0088	FRP control system	*	-	*	-	*	-	-	-
P00B3 P00B4	Engine coolant temperature sensor 2	-	-	-	-	-	-	-	High coolant temperature control does not function.
P0101 P0102 P0103	Mass air flow sensor	*	*	-	*	*	*	*	NOTE: Fail-safe mode may not start depending on malfunction type of ECM
P0117 P0118	Engine coolant temperature sensor 1	-	-	-	-	*	*	-	The engine speed does not exceed 2, 000 RPM due to fuel cut
P0122 P0123 P0222 P0223 P2135	Throttle position sensor	-	-	-	*	-	-	-	The ECM controls the electric throttle control actuator in regulating the throttle opening in order for the idle position to be within +10 degrees. The ECM regulates the opening speed of the throttle valve to be slower than the normal condition. So, the acceleration will be poor.
P0171 P0172	Fuel injection system	*	-	-	-	*	*	-	-
P0190	FRP sensor	*	*	*	*	*	*	-	High pressure fuel pump is activated at maximum discharge pressure. NOTE: Fail-safe mode may not start depending on malfunction type of ECM
P0191 P0192 P0193	FRP sensor	*	*	-	-	*	-	-	High pressure fuel pump is activated at maximum discharge pressure. NOTE: Fail-safe mode may not start depending on malfunction type of ECM
P0196 P0197 P0198	Engine oil temperature sensor	-	-	-	-	-	-	-	Exhaust valve timing control does not function.
P0201 P0202 P0203 P0204	Injector	*	-	*	-	*	-	-	-
P0237	Turbocharger boost sensor	*	*	-	*	-	-	-	-
P0300 P0301 P0302 P0303 P0304	Misfire	*	-	-	-	*	*	-	-
P0335	Crankshaft position sensor	-	-	-	*	-	-	-	-
P0340	Camshaft position sensor	-	-	-	*	-	-	-	-
P0365	Exhaust valve timing control position sensor	-	-	-	*	-	-	-	-
P0401 P0402	EGR system	-	-	-	*	-	-	-	-
P0404	EGR volume control valve	*	-	*	*	*	*	-	-
P0407 P0408 P046E P046F P0486	EGR pressure sensor	-	-	-	*	-	-	-	-
P0448	EVAP canister vent control valve	*	-	-	*	-	-	-	-
P044A P044B P044C P044D P044E	EGR volume control valve position sensor	*	-	-	*	-	-	-	-
P0500	Vehicle speed sensor	*	-	-	-	*	*	-	-
P0501 P2159	Vehicle speed sensor	*	-	-	-	*	-	-	-
P050A	Cold start control	*	-	-	-	*	-	-	-
P0524	Engine oil pressure	-	-	-	-	-	-	-	ECM illuminates oil pressure warning lamp on the combination meter. Engine speed will not rise more than 4, 000 RPM due to the fuel cut. Fail-safe is canceled when ignition switch OFF → ON.
P0603 P0607	ECM	*	*	-	-	-	-	-	-
P0604 P0605 P0606 P060B		-	-	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P060A		*	*	-	*	-	-	-	NOTE: Fail-safe mode may not start depending on malfunction type of ECM
P062B		*	-	*	-	*	-	-
P0643	Sensor power supply	-	-	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P119A	FRP sensor	*	-	-	-	*	-	-	-
P119B	FRP sensor	*	-	-	-	*	-	-	-
P119C	FRP sensor	*	-	-	-	*	-	-	-
P1197	Out of gas	-	-	*	*	-	-	-	-
P1217	Engine over temperature	-	-	-	-	-	-	-	The engine speed does not exceed 2, 000 RPM due to fuel cut
P159B	G sensor	*	-	-	-	*	-	-	-
P2100 P2103	Throttle control motor relay	-	-	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P2004	Intake manifold runner control valve	-	-	-	*	-	-	-	-
P2014	Intake manifold runner control valve position sensor	-	-	-	*	-	-	-	-
P2016	Intake manifold runner control valve position sensor	-	-	-	*	-	-	-	-
P2017	Intake manifold runner control valve position sensor	-	-	-	*	-	-	-	-
P2018	Intake manifold runner control valve position sensor	-	-	-	*	-	-	-	-
P2101	Electric throttle control function	-	-	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P2118	Throttle control motor	-	-	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P2119	Electric throttle control actuator	*	*	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. NOTE: Fail-safe mode may not start depending on malfunction type of ECM
P2122 P2123 P2127 P2128 P2138	Accelerator pedal position sensor	-	-	-	*	-	-	-	The ECM controls the electric throttle control actuator in regulating the throttle opening in order for the idle position to be within +10 degrees. The ECM regulates the opening speed of the throttle valve to be slower than the normal condition. So, the acceleration will be poor.
P2162	Vehicle speed sensor	*	-	-	-	*	-	-	-
P2263	Turbocharger system	*	*	-	*	-	-	-	-
P2562 P2566	Electric wastegate control valve position sensor	*	*	-	*	-	-	-	The ECM stops the electric wastegate actuator control, engine can not be supercharged driving. The ECM regulates engine power limiter and EGR Off.
P2563	Electric wastegate control valve position sensor	*	*	-	*	-	-	-	-
P2564	Electric wastegate control valve position sensor	*	*	-	*	-	-	-	-
P2565	Electric wastegate control valve position sensor	*	*	-	*	-	-	-	-
P26A3 P26A5 P26A6 P26A7	Multi-way control valve	-	-	-	-	-	-	-	When detecting a malfunction with the valve closed, ECM fully opens the valve. When detecting a malfunction with the valve opened, ECM maintains valve angle. When detecting a malfunction in sensor, ECM fully opens the valve. ECM limits the engine output depending on malfunctions.