Tire Pressure Sensor Registration: Notes

NOTE: If a CONSULT-II is used without also using the CONSULT-II CONVERTER, a malfunction might be detected during self-diagnosis, depending on which control unit carries-out CAN communication.

NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions:

Activate TPMS transmitters
Display TPMS transmitter IDs
Display tire pressure reported by the TPMS transmitter
Read TPMS DTCs
Register TPMS transmitter IDs

TPMS ID registration can be performed using one of the following procedures:

Transmitter Activation tool (J-45295-A) with CONSULT (preferred method)
Signal Tech II tool (J-50190) with CONSULT (preferred method)
Signal Tech II tool (J-50190) without CONSULT
CONSULT only