DTC Confirmation Procedure
- PERFORM DTC CONFIRMATION PROCEDURE 1
- Press push-button ignition switch under the following conditions and wait 1 second or more.
CVT models
- Selector lever: In the P position
- Brake pedal: Not depressed
M/T models
- Shift lever: In the neutral position
- Clutch pedal: Not depressed
- Check DTC in "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT.
Is DTC detected?
YES
Go to DIAGNOSIS PROCEDURE .
NO
Inspection End.
- Press push-button ignition switch under the following conditions and wait 1 second or more.