DTC Detection Logic

NOTE:

If DTC B210D is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B210D	STARTER RELAY ON CIRC	When comparing the following items, IPDM E/R detects that starter control relay is stuck in the ON position for 5 second or more. Starter control relay signal (CAN) from BCM Starter relay status signal (CAN) from BCM Starter control relay and starter relay status signal (IPDM E/R input) Starter control relay control signal (IPDM E/R output)	Harness or connectors (starter motor relay control circuit open or short) IPDM E/R BCM