LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2017 >> Sentra SV >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Security Control System (With Intelligent Key System) (DTCS)) >> DTC/Circuit Diagnosis >> DTC B210D: Starter Relay >> DTC Logic >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Press push-button ignition switch under the following conditions to start engine, and wait 1 second or more.

      CVT models

      • CVT selector lever is in the P (Park) or N (Neutral) position
      • Do not depress the brake pedal

      M/T models

      • Shift lever: in the neutral position
      • Clutch pedal: Not depressed
    2. Check DTC in Self Diagnostic Result mode of IPDM E/R using CONSULT.

    Is DTC detected?

    YES 

    Go to DIAGNOSIS PROCEDURE .

    NO 

    Inspection End

scientia non olet · About LEMON Manuals