DTC Detection Logic

WARNING: This page is about a different car, the 2016 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If DTC B2605 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
If DTC B2605 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC LOGIC .

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B2605	SHIFT PN DIAG IPDM	When ignition switch is ON, P/N position signal input from transmission range switch and P/N position signal (CAN) input from IPDM E/R do not match.	Harness or connectors (The CAN communication line is open or shorted.) Harness or connectors (Transmission range switch circuit is open or shorted.) Transmission range switch IPDM E/R BCM