LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2017 >> Titan SL, 4WD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System >> Circuit Diagnosis >> Encoder >> Driver Side >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

Regarding Wiring Diagram information, refer to WIRING DIAGRAM- WITH CREW CAB , or WIRING DIAGRAM- EXCEPT CREW CAB .

  1. CHECK ENCODER SIGNAL

    1. Turn ignition switch ON.
    2. Check signal between main power window and door lock/unlock switch harness connector and ground with oscilloscope.
      WITH CREW CAB

      Signal Name (+) (-) Signal
      (Reference Value)
      Main Power Window And Door Lock/Unlock Switch
      Connector Terminal
      Encoder signal 1 D7 5 Ground Refer to following signals
      Encoder signal 2 4
      EXCEPT CREW CAB

      Signal Name (+) (-) Signal
      (Reference Value)
      Main Power Window And Door Lock/Unlock Switch
      Connector Terminal
      Encoder signal 1 D5 1 Ground Refer to following signals
      Encoder signal 2 2
      G06934392Courtesy of NISSAN NORTH AMERICA, INC.

    Is the inspection result normal?

    YES 

    Replace main power window and door lock/unlock switch. Refer to REMOVAL AND INSTALLATION .

    NO 

    GO TO STEP 2  .

  2. CHECK ENCODER SIGNAL CIRCUIT

    1. Turn ignition switch OFF.
    2. Disconnect main power window and door lock/unlock switch connector and front power window motor LH connector.
    3. Check continuity between main power window and door lock/unlock switch harness connector and front power window motor LH harness connector.
      WITH CREW CAB

      Main Power Window And Door Lock/Unlock Switch Front Power Window Motor LH Continuity
      Connector Terminal Connector Terminal
      D7 4 D9 5 Yes
      5 6
      EXCEPT CREW CAB

      Main Power Window And Door Lock/Unlock Switch Front Power Window Motor LH Continuity
      Connector Terminal Connector Terminal
      D5 2 D9 5 Yes
      1 6
    4. Check continuity between main power window and door lock/unlock switch harness connector and ground.
      WITH CREW CAB

      Main Power Window And Door Lock/Unlock Switch Ground Continuity
      Connector Terminal
      D7 4 No
      5
      EXCEPT CREW CAB

      Main Power Window And Door Lock/Unlock Switch Ground Continuity
      Connector Terminal
      D5 1 No
      2

    Is the inspection result normal?

    YES 

    GO TO STEP 3  .

    NO 

    Repair or replace harness.

  3. CHECK ENCODER POWER SUPPLY

    1. Connect main power window and door lock/unlock switch connector.
    2. Turn ignition switch ON.
    3. Check voltage between front power window motor LH harness connector and ground.
      (+) (-) Voltage
      (Approx.)
      Front Power Window Motor LH
      Connector Terminal
      D9 2 Ground Battery voltage

    Is the inspection result normal?

    YES 

    GO TO STEP 5  .

    NO 

    GO TO STEP 4  .

  4. CHECK ENCODER POWER SUPPLY CIRCUIT

    1. Turn ignition switch OFF.
    2. Disconnect main power window and door lock/unlock switch connector.
    3. Check continuity between main power window and door lock/unlock switch harness connector and front power window motor LH harness connector.
      WITH CREW CAB

      Main Power Window And Door Lock/Unlock Switch Front Power Window Motor LH Continuity
      Connector Terminal Connector Terminal
      D7 14 D9 2 Yes
      EXCEPT CREW CAB

      Main Power Window And Door Lock/Unlock Switch Front Power Window Motor LH Continuity
      Connector Terminal Connector Terminal
      D5 10 D9 2 Yes
    4. Check continuity between main power window and door lock/unlock switch harness connector and ground.
      WITH CREW CAB

      Main Power Window And Door Lock/Unlock Switch Ground Continuity
      Connector Terminal
      D7 14 No
      EXCEPT CREW CAB

      Main Power Window And Door Lock/Unlock Switch Ground Continuity
      Connector Terminal
      D5 12 No

    Is the inspection result normal?

    YES 

    Replace main power window and door lock/unlock switch. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace harness.

  5. CHECK GROUND CIRCUIT 1

    1. Turn ignition switch OFF.
    2. Check continuity between front power window motor LH harness connector and ground.
      Front Power Window Motor LH Ground Continuity
      Connector Terminal
      D9 4 Yes

    Is the inspection result normal?

    YES 

    Replace front power window motor LH. Refer to REMOVAL AND INSTALLATION .

    NO 

    GO TO STEP 6  .

  6. CHECK GROUND CIRCUIT 2

    1. Disconnect main power window and door lock/unlock switch connector.
    2. Check continuity between main power window and door lock/unlock switch harness connector and front power window motor LH harness connector.
      WITH CREW CAB

      Main Power Window And Door Lock/Unlock Switch Front Power Window Motor LH Continuity
      Connector Terminal Connector Terminal
      D7 12 D9 4 Yes
      EXCEPT CREW CAB

      Main Power Window And Door Lock/Unlock Switch Front Power Window Motor LH Continuity
      Connector Terminal Connector Terminal
      D5 11 D9 4 Yes
    3. Check continuity between main power window and door lock/unlock switch harness connector and ground.
      WITH CREW CAB

      Main Power Window And Door Lock/Unlock Switch Ground Continuity
      Connector Terminal
      D7 12 No
      EXCEPT CREW CAB

      Main Power Window And Door Lock/Unlock Switch Ground Continuity
      Connector Terminal
      D5 11 No

    Is the inspection result normal?

    YES 

    Replace main power window and door lock/unlock switch. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace harness.

scientia non olet · About LEMON Manuals