Input And Output Signals
Major signal transmission between each unit via communication lines is shown in the following table.
| Component | Signal description |
|---|---|
| Yaw rate/side/decel G sensor | Mainly transmits the following signals to ABS actuator and electric unit (control unit) via communication line* 1
:
|
| Transfer control unit* 2 | Mainly receives the following signal from ABS actuator and electric unit (control unit) via CAN communication:
|
| Combination meter | Mainly receives the following signal from ABS actuator and electric unit (control unit) via CAN communication:
|
* 1: Communication line between yaw rate/side/decel G sensor and ABS actuator and electric unit (control unit)
* 2: Models with 4WD system