DTC Detection Logic

NOTE: If DTC P0340 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to DTC Description .

DTC	CONSULT screen terms (Trouble diagnosis content)	DTC detection condition
P0340	CMP SEN/CIRC-B1 (Camshaft Position Sensor "A" Circuit Bank 1 or Single Sensor)	1	Diagnosis condition	-
			Signal (terminal)	-
			Threshold	The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking.
			Diagnosis delay time	-
		2	Diagnosis condition	-
			Signal (terminal)	-
			Threshold	The cylinder No. signal is not sent to ECM during engine running.
			Diagnosis delay time	-
		3	Diagnosis condition	-
			Signal (terminal)	-
			Threshold	The cylinder No. signal is not in the normal pattern during engine running.
			Diagnosis delay time	-