Data Monitor
|
Item [Unit] |
Description |
|
|
IGN VOLT |
[V] |
Displays the ignition power supply voltage. |
|
CONTROL MODULE MALF |
[Off/On] |
Displays the chassis control module malfunction. |
|
CAN DIAG STATUS |
[Off/On] |
Displays CAN network diagnosis status. |
|
VEHICLE SPEED |
[km/h/mph] |
Displays the vehicle speed. |
|
FR WHEEL SPEED |
[RPM] |
Displays the rotational speed of front RH tire. |
|
FL WHEEL SPEED |
[RPM] |
Displays the rotational speed of front LH tire. |
|
RR WHEEL SPEED |
[RPM] |
Displays the rotational speed of rear RH tire. |
|
RL WHEEL SPEED |
[RPM] |
Displays the rotational speed of rear LH tire. |
|
STEERING ANG SENSOR |
[deg] |
Displays the steering angle from the steering angle sensor. |
|
DECEL G SENSOR |
[G] |
Displays the decel G. |
|
SIDE G SENSOR |
[G] |
Displays the side G. |
|
YAW RATE SENSOR |
[deg/s] |
Displays the yaw rate. |
|
ACCELE PEDAL POSITION |
[%] |
Displays the accelerator pedal position. |
|
THROTTLE CONTROL |
[NORMAL/INCORR/PREV/INPOSSI] |
Displays the electric throttle status. |
|
BRAKE SWITCH 2 |
[Off/On] |
Displays the brake pedal operating status. |
|
BRAKE SWITCH 1 |
[Off/On] |
Displays the brake pedal operating status. |
|
STOP LAMP SW |
[ACTIVE/INACTIVE] |
Displays the stop lamp switch status. |
|
PRESS SENSOR |
[bar] |
Displays the brake fluid pressure. |
|
ABS |
[ACTIVE/INACTIVE] |
Displays the ABS function status. |
|
ABS MALF |
[Off/On] |
Displays the ABS function status. |
|
EBD |
[ACTIVE/INACTIVE] |
Displays the EBD function status. |
|
TCS |
[ACTIVE/INACTIVE] |
Displays the TCS function status. |
|
TCS MALF |
[Off/On] |
Displays the TCS function status. |
|
VDC |
[ACTIVE/INACTIVE] |
Displays the VDC function status. |
|
VDC MALF |
[Off/On] |
Displays the VDC function status. |
|
VDC OFF SWITCH |
[Off/On] |
Displays VDC OFF switch status. |
|
ATC 1 |
[Off/On] |
Displays the active trace control function operation status. |
|
ATC 2 |
[Off/On] |
Displays the active trace control function operation status. |
|
ATC 4 |
[Off/On] |
Displays the active trace control function operation status. |
|
BRAKE HOLD |
[ACT/INACT/RELEA] |
Displays the brake hold status. |
|
ATC 3 |
[Off/On] |
Displays the active trace control function operation status. |
|
FL TIRE DISP |
[DEF/3] |
Displays the status of front LH tire displayed on the information display in the combination meter. |
|
FR TIRE DISP |
[DEF/3] |
Displays the status of front RH tire displayed on the information display in the combination meter. |
|
RL TIRE DISP |
[DEF/3] |
Displays the status of rear LH tire displayed on the information display in the combination meter. |
|
RR TIRE DISP |
[DEF/3] |
Displays the status of rear RH tire displayed on the information display in the combination meter. |
|
VEHICLE DISP |
[DEF/3] |
Displays the operating status of active ride control (brake control) function displayed on the information display in the combination meter. |
|
INTERRUPT DISP |
[NO REQ/HOLD 1/HOLD 2/ARC] |
Displays the interruption status on the information display in the combination meter. |
|
TURN DISP |
[N STEER/LEFT/RIGHT/NOT] |
Displays the turning direction of active trace control function and active engine brake function on the information display in the combination meter. |
|
BRAKE HOLD DISP |
[ACT / INACT / RELEA] |
Displays the operating status of hill start assist function displayed on the information display in the combination meter. |
|
ATC DISP |
[Off/On] |
Displays the operating status of active trace control function displayed on the information display in the combination meter. |
|
ATC 5 |
[Off/On] |
Displays the active trace control function operation status. |
|
ARC BRAKE |
[Off/On] |
Displays the active ride control (brake control) function operation status. |
|
ARC BRAKE DISP |
[Off/On] |
Displays the operating status of active ride control (brake control) function displayed on the information display in the combination meter. |
|
AEB CVT PERMIT |
[Off/On] |
Displays the transaxle authorized state for active engine brake function. |
|
AEB STATUS |
[Off/On] |
Displays the active engine brake (brake control) function operation status. |
|
AEB COMMAND 1 |
[G] |
Displays the relative command value of active engine brake function. |
|
AEB SLIP RATE |
[%] |
Displays the slip ratio of active engine brake function is operating. |
|
ATC SETTING |
[Off/On] |
Displays the setting status of active trace control function by steering switch. |
|
AEB SETTING |
[Off/On] |
Displays the setting status of active engine brake function by steering switch. |