DTC Detection Logic
There is a gap between angle of target and phase-control angle degree.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P0022 |
Camshaft position B2 ("A" camshaft position - timing over-retarded bank 2) |
Diagnosis condition |
- |
|
Signal (terminal) |
Camshaft position sensor signal |
||
|
Threshold |
During the retarded control of intake valve timing control, the angle difference between actual angle and target angle is 13 degrees or more. |
||
|
Diagnosis delay time |
6 seconds or more |
||