Work Procedure
- SAVING VEHICLE SPECIFICATION (BCM)
CONSULT Configuration
Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification.
Refer to Work Procedure .
NOTE: If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM..
- SAVING VEHICLE SPECIFICATION (TPMS)
Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification.
Refer to Work Procedure .
NOTE: If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM..
- REPLACE BCM
Replace BCM. Refer to Removal and Installation .
.
- WRITING VEHICLE SPECIFICATION (BCM)
Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Description .
.
- REGISTER INTELLIGENT KEYS
For initialization and registration of Intelligent Keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.
.
- WRITING VEHICLE SPECIFICATION (TPMS)
Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Description .
.
- INITIALIZE TPMS
Perform TPMS initialization. Refer to Work Procedure .
Work End.