Work Procedure

WARNING: This page is about a different car, the 2018 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM ECM RECOMMUNICATING FUNCTION
1. Install ECM.
2. Insert the registered ignition key* into key cylinder, then turn ignition switch ON.
  *: To perform this step, use the key that is used before performing ECM replacement.
3. Maintain ignition switch in the ON position for at least 5 seconds.
4. Turn ignition switch OFF.
5. Start the engine.
GO TO 2.
PERFORM ADDITIONAL SERVICE WHEN REPLACING ECM
Perform Work Procedure .

Inspection End