Diagnosis Procedure

1. Perform initialization of BCM and registration of all mechanical keys using CONSULT.

   For initialization and registration procedures, refer to CONSULT Immobilizer mode and follow the on-screen instructions.

2. Start the engine.

Does the engine start?

YES

Inspection End.

NO

GO TO 2.

1. Turn ignition switch OFF.
2. Disconnect BCM connector and dongle unit connector.
3. Check continuity between BCM harness connector and dongle unit harness connector.

   BCM		Dongle unit		Continuity
   Connector	Terminal	Connector	Terminal
   M21	24	M39	1	Yes

4. Check continuity between BCM harness connector and ground.

   BCM		Ground	Continuity
   Connector	Terminal
   M21	24		No

Is the inspection result normal?

YES

GO TO 3.

NO

Repair or replace harness.

Check continuity between dongle unit harness connector and ground.

Is the inspection result normal?

YES

Replace dongle unit.

NO

Repair or replace harness.