Data Monitor

Monitor Item [Unit]

Main

Signals

Description

MOTOR FAN REQ [%]

X

Indicates cooling fan speed signal received from ECM on CAN communication line

AC COMP REQ [On/Off]

X

Indicates A/C compressor request signal received from ECM on CAN communication line

TAIL&CLR REQ [On/Off]

X

Indicates position light request signal received from BCM on CAN communication line

HL LO REQ [On/Off]

X

Indicates low beam request signal received from BCM on CAN communication line

HL HI REQ [On/Off]

X

Indicates high beam request signal received from BCM on CAN communication line

FR FOG REQ [On/Off]

X

Indicates front fog light request signal received from BCM on CAN communication line

FR WIP REQ [Stop/1LOW/Low/Hi]

X

Indicates front wiper request signal received from BCM on CAN communication line

WIP AUTO STOP [STOP P/ACT P]

X

Indicates condition of front wiper auto stop signal

WIP PROT [Off/BLOCK]

X

Indicates condition of front wiper fail-safe operation

IGN RLY1 -REQ [On/Off]

Indicates ignition switch ON signal received from BCM on CAN communication line

IGN RLY [On/Off]

X

Indicates condition of ignition relay

INTER/NP SW [On/Off]

Indicates condition of CVT shift position

ST RLY CONT [On/Off]

Indicates starter relay status signal received from BCM on CAN communication line

IHBT RLY -REQ [On/Off]

Indicates starter control relay signal received from BCM on CAN communication line

ST/INHI RLY [Off/ ST /INHI]

Indicates condition of starter relay and starter control relay

DETENT SW [On/Off]

Indicates condition of CVT shift selector (park position switch)

DTRL REQ [Off]

Indicates daytime running light request signal received from BCM on CAN communication line

THFT HRN REQ [On/Off]

Indicates theft warning horn request signal received from BCM on CAN communication line

HORN CHIRP [On/Off]

Indicates horn reminder signal received from BCM on CAN communication line