Active Test
- Never perform "Active Test" while driving the vehicle.
- The "Active Test" cannot be performed when the following systems malfunction is displayed.
- ICC system
- Blind Spot Warning/RCTA
- AEB
- The "Active Test" cannot be performed when the AEB warning lamp is illuminated.
- The "Active Test" cannot be performed when the ICC System is ON.
|
Test item |
Description |
|
METER LAMP |
The AEB warning lamp can be illuminated by ON/OFF operation as necessary. |
|
STOP LAMP |
The ICC brake hold relay can be operated by ON/OFF operation as necessary, and the stop lamp can be illuminated. |
|
ADAS Buzzer 2 |
Sounds a buzzer used for BSW, RCTA, ICC and AEB by arbitrarily operating ON/OFF. |
|
BRAKE ACTUATOR 1 |
Activates the brake by an arbitrary operation. |
|
BRAKE ACTUATOR 2 |
|
|
BRAKE ACTUATOR 3 |
METER LAMP
|
Test item |
Operation |
Description |
AEB warning lamp |
|
METER LAMP |
Off |
Stops sending the AEB warning lamp signal to exit from the test. |
OFF |
|
On |
Transmits the AEB warning lamp signal to the combination meter via CAN communication. |
ON |
STOP LAMP
|
Test item |
Operation |
Description |
Stop lamp |
|
STOP LAMP |
Off |
Stops transmitting the ICC brake hold relay drive signal to end the test. |
OFF |
|
On |
Transmits the ICC brake hold relay drive signal. |
ON |
ADAS BUZZER 2
|
Test item |
Operation |
Description |
Operation sound |
|
ADAS buzzer 2 |
On |
Starts buzzer output. |
OFF |
|
Off |
Stops buzzer output. |
ON |
BRAKE ACTUATOR
|
Test item |
Operation |
Description |
"PRESS ORDER" value |
|
BRAKE ACTUATOR 1 |
Off |
Stops transmitting the brake fluid pressure control signal to end the test. |
- |
|
On |
Starts transmitting the brake fluid pressure control signal to start the test. |
10 bar |
|
|
BRAKE ACTUATOR 2 |
Off |
Stops transmitting the brake fluid pressure control signal to end the test. |
- |
|
On |
Starts transmitting the brake fluid pressure control signal to start the test. |
20 bar |
|
|
BRAKE ACTUATOR 3 |
Off |
Stops transmitting the brake fluid pressure control signal to end the test. |
- |
|
On |
Starts transmitting the brake fluid pressure control signal to start the test. |
30 bar |