Data Monitor
|
Monitored item [Unit] |
ALL SIG (ICC) |
MAIN SIG (ICC) |
MAIN SIG (BSW) |
Description |
||
|
MAIN SW [On/Off] |
X |
X |
X |
Indicates [ON/OFF] status as judged from ICC steering switch. |
||
|
SET/COAST SW [On/Off] |
X |
X |
Indicates [ON/OFF] status as judged from ICC steering switch. |
|||
|
CANCEL SW [On/Off] |
X |
X |
Indicates [ON/OFF] status as judged from ICC steering switch. |
|||
|
RESUME/ACC SW [On/Off] |
X |
X |
Indicates [ON/OFF] status as judged from ICC steering switch. |
|||
|
DISTANCE SW [On/Off] |
X |
Indicates [ON/OFF] status as judged from ICC steering switch. |
||||
|
CRUISE OPE [On/Off] |
X |
X |
Indicates whether controlling or not (ON means "controlling"). |
|||
|
BRAKE SW [On/Off] |
X |
X |
X |
Indicates [ON/OFF] status as judged from ICC brake switch signal (ECM transmits ICC brake switch signal through CAN communication). |
||
|
STOP LAMP SW [On/Off] |
X |
X |
X |
Indicates [ON/OFF] status as judged from stop lamp switch signal (ECM transmits stop lamp switch signal through CAN communication). |
||
|
IDLE SW [On/Off] |
X |
Indicates [ON/OFF] status of idle switch read from ADAS control unit through CAN communication (ECM transmits ON/OFF status through CAN communication). |
||||
|
SET DISTANCE [Short/Mid/Long] |
X |
X |
Indicates set distance memorized in ADAS control unit. |
|||
|
CRUISE LAMP [On/Off] |
X |
X |
Indicates [ON/OFF] status of MAIN switch indicator output. |
|||
|
VHCL AHEAD [On/Off] |
X |
Indicates [ON/OFF] status of vehicle ahead detection indicator output. |
||||
|
ICC WARNING [On/Off] |
X |
Indicates [ON/OFF] status of ICC system warning lamp output. |
||||
|
VHCL SPEED SE [km/h] or [mph] |
X |
X |
X |
Indicates vehicle speed calculated from ADAS control unit through CAN communication [ABS actuator and electric unit (control unit) transmits vehicle speed signal (wheel speed) through CAN communication]. |
||
|
SET VHCL SPD [km/h] or [mph] |
X |
X |
Indicates set vehicle speed memorized in ADAS control unit. |
|||
|
BUZZER O/P [On/Off] |
X |
Indicates [ON/OFF] status of warning buzzer output. |
||||
|
THRTL SENSOR [%] |
X |
Indicates throttle position read from ISS sensor through CAN communication (ECM transmits accelerator pedal position signal through CAN communication). |
||||
|
ENGINE RPM [rpm] |
X |
Indicates engine speed read from ADAS control unit through CAN communication (ECM transmits engine speed signal through CAN communication). |
||||
|
PRESS ORDER [bar] |
X |
X |
Indicates status as judged from brake fluid pressure signal [ABS actuator and electric unit (control unit) transmits brake fluid pressure signal through CAN communication]. |
|||
|
WIPER SW [OFF/LOW/HIGH] |
X |
Indicates wiper [OFF/LOW/HIGH] status (BCM transmits front wiper request signal through CAN communication). |
||||
|
YAW RATE [deg/s] |
X |
Indicates yaw rate read from ADAS control unit through ITS communication [ADAS control unit receives yaw rate signal from ABS actuator and electric unit (control unit) via CAN communication and transmits yaw rate calculated by the ADAS control unit] Yaw rate judged from a yaw rate signal read by distance sensor (ICC sensor) via ITS communication is displayed [ADAS control unit receives a yaw rate signal from ABS actuator and electric unit (control unit) via CAN communication and transmits the calculated yaw rate to distance sensor (ICC sensor) via ITS communication]. |
||||
|
BA WARNING [On/Off] |
X |
Indicates [ON/OFF] status of AEB indicator lamp output. |
||||
|
STP LMP DRIVE [On/Off] |
X |
X |
Indicates [ON/OFF] status of ICC brake hold relay drive output. |
|||
|
D POSITION SW [On/Off] |
X |
Indicates [ON/OFF] status of "D" or "M" positions read from ADAS control unit through CAN communication; ON when position "D" or "M" (TCM transmits shift selector position signal through CAN communication). |
||||
|
NP RANGE SW [On/Off] |
X |
Indicates shift selector position signal read from ADAS control unit through CAN communication (TCM transmits shift selector position signal through CAN communication). |
||||
|
PKB SW [On/Off] |
X |
Parking brake switch status [ON/OFF] judged from the parking brake switch signal that ADAS control unit receives via CAN communication is displayed (combination meter transmits the parking brake switch signal via CAN communication). |
||||
|
PWR SUP MONI [V] |
X |
X |
Indicates ignition voltage input monitored by ADAS control unit. |
|||
|
VHCL SPD AT [km/h] or [mph] |
X |
Indicates vehicle speed calculated from CVT vehicle speed sensor read from ADAS control unit through CAN communication (TCM transmits CVT vehicle speed sensor signal through CAN communication). |
||||
|
THRTL OPENING [%] |
X |
X |
Indicates throttle position read from ADAS control unit through CAN communication (ECM transmits accelerator pedal position signal through CAN communication). |
|||
|
GEAR [1, 2, 3, 4, 5, 6, 7] |
X |
Indicates CVT gear position read from ADAS control unit through CAN communication (TCM transmits current gear position signal through CAN communication). |
||||
|
NP SW SIG [On/Off] |
X |
Indicates [ON/OFF] status as judged from park/neutral position switch signal (ECM transmits park/neutral position switch signal through CAN communication). |
||||
|
MODE SIG [OFF, ICC, ASCD] |
X |
Indicates the active mode from ICC or ASCD [conventional (fixed speed) cruise control mode]. |
||||
|
SET DISP IND [On/Off] |
X |
Indicates [ON/OFF] status of SET switch indicator output. |
||||
|
DISTANCE [m] |
X |
Indicates the distance from the vehicle ahead. |
||||
|
RELATIVE SPD [m/s] |
X |
Indicates the relative speed of the vehicle ahead. |
||||
|
SIDE G [G] |
X |
Indicates lateral G acting on the vehicle. This lateral G is judged from a side G sensor signal read by ADAS control unit via CAN communication. (The ABS actuator and electric unit (control unit) transmits a side G sensor signal via CAN communication). |
||||
|
FUNC ITEM(FCW) [On/Off] |
X |
X |
X |
Indicates system which can be set to ON/OFF by selecting "Driver Assistance"→"Emergency Brake" of the integral switch: Automatic Emergency Braking. |
||
|
FUNC ITEM(BSW) [On/Off] |
X |
X |
X |
Indicates system which can be set to ON/OFF by selecting "Driver Assistance"→"Blind Spot" of the integral switch: Blind Spot Warning. |
||
|
FCW SELECT [On/Off] |
X |
X |
X |
Indicates an ON/OFF state of the AEB system. The AEB system can be set to ON/OFF by selecting "Driver Assistance"→"Emergency Brake" of the integral switch. |
||
|
BSW SELECT [On/Off] |
X |
X |
X |
Indicates an ON/OFF state of the BSW system. The BSW system can be set to ON/OFF by selecting "Driver Assistance"→"Blind Spot" of the integral switch. |
||
|
BSW/BSI WARN LMP [On/Off] |
X |
Indicates [ON/OFF] status of Blind Spot warning malfunction. |
||||
|
BSW SYSTEM ON [On/Off] |
X |
Indicates [ON/OFF] status of BSW system. |
||||
|
FCW SYSTEM ON [On/Off] |
X |
X |
Indicates [ON/OFF] status of AEB system. |
|||
|
BUZZEROUTPUT [On/Off] |
X |
Indicates [On/Off] status of warning buzzer output. |
||||
|
SYSTEM CANCEL MESSAGE [NOREQ/SLIP/VDC OFF] |
X |
X |
X |
Indicates [ON/OFF] status of system cancel display output. |
||
|
BSW ON INDICATOR [On/Off] |
X |
Indicates [ON/OFF] status of BSW system ON display output. |
||||
|
BSI/BSW [On/Off] |
Indicates [ON/OFF] state of the BSW system. |
|||||
|
SIDE RADAR BLOCK COND [On/Off] |
X |
Indicates [ON/OFF] status of side radar with dirt or foreign materials. |
||||
|
BSW IND BRIGHTNESS [Nothing/Bright/Normal/Dark] |
X |
Indicates status of brightness of Blind Spot Warning indicator. |
||||
|
FEB AVAILABLE COND [On/Off] |
Indicates [On/Off] available condition of AEB system. |
|||||