LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2018 >> Sentra SV >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (MRA8DE) (DTC/Circuit Diagnosis) (3 Of 4) >> DTC/Circuit Diagnosis >> DTC P2017: Intake Manifold Runner Control Valve Position Sensor >> DTC Description >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

NOTE: If DTC P2014, P2016, P2017 or P2018 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to DTC Index .

DTC No.

CONSULT screen terms

(Trouble diagnosis content)

DTC detecting condition

Possible cause

P2014

IN/MANIFOLD RUNNER POS SEN B1

(Intake manifold runner position sensor/switch circuit bank 1)

An excessively low voltage from the sensor is sent to ECM.
  • Harness or connectors

    (Intake manifold runner control position sensor circuit is shorted.)

  • Intake manifold runner control position sensor
  • Sensor power supply 2 circuit

P2016

IN/MANIFOLD RUNNER POS SEN B1

(Intake manifold runner position sensor/switch circuit low bank 1)

P2017

IN/MANIFOLD RUNNER POS SEN B1

(Intake manifold runner position sensor/switch circuit high bank 1)

An excessively high voltage from the sensor is sent to ECM.

P2018

IN/MANIFOLD RUNNER POS SEN B1

(Intake manifold runner position sensor/switch circuit intermittent bank 1)
scientia non olet · About LEMON Manuals