LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2019 >> 370Z Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B210D: Starter Relay >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

WARNING: This page is about a different car, the 2017 Nissan 370Z and 2016 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC B210D is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
  • If DTC B210D is displayed with DTC B2617, first perform the trouble diagnosis for DTC B2617. Refer to DTC LOGIC .
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B210D STARTER RELAY ON IPDM E/R detects that the relay is stuck in the ON position even if the following conditions are met for about 1 second.
  • Starter control relay ON/OFF signal from BCM
  • Transmission range switch input
 IPDM E/R
scientia non olet · About LEMON Manuals