LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2019 >> 370Z Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Hood Switch >> Component Inspection >> Diagnostic Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

WARNING: This page is about a different car, the 2017 Nissan 370Z and 2016 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK HOOD SWITCH

    1. Turn ignition switch OFF.
    2. Disconnect hood switch connector.
    3. Check continuity between hood switch terminals.
      Hood switch Condition Continuity
      Terminal
      1 2 Hood switch Pressed Not existed
      Released Existed

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace hood lock (RH). Refer to REMOVAL AND INSTALLATION (Coupe models) or REMOVAL AND INSTALLATION (Roadster models).