Application Item
CONSULT performs the following functions via CAN communication with BCM.
|
Diagnosis mode |
Function Description |
|
Work Support |
Changes the setting for each system function. |
|
Self Diagnostic Result |
Displays the diagnosis results judged by BCM. Refer to DTC Index . |
|
CAN Diag Support Monitor |
Monitors the reception status of CAN communication viewed from BCM. |
|
Data Monitor |
The BCM input/output signals are displayed. |
|
Active Test |
The signals used to activate each device are forcibly supplied from BCM. |
|
Ecu Identification |
The BCM part number is displayed. |
|
Configuration |
|