DTC Description
Description
CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern vehicles are equipped with many electronic control units and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN high, CAN low) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only. CAN Communication Signal Chart. Refer to CAN Communication Signal Chart .
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen terms (Trouble diagnosis content) |
DTC Detection Condition |
|
|
U1000 |
CAN COMM CIRCUIT (CAN communication circuit) |
Diagnosis condition |
When ignition switch is ON. |
|
Signal (terminal) |
- |
||
|
Threshold |
- |
||
|
Diagnosis delay time |
2 seconds or more |
||
POSSIBLE CAUSE
CAN communication system
FAIL-SAFE
-