DTC Detection Logic
NOTE:
- If DTC B210B is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Description .
- If DTC B210B is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC Description .
|
DTC No. |
CONSULT screen terms (Trouble diagnosis content) |
DTC Detection Condition |
|
|
B210B |
START CONT RLY ON |
Diagnosis condition |
When the ignition switch is ON. |
|
Signal (terminal) |
-- |
||
|
Threshold |
IPDM E/R detects that the relay is stuck at ON position even if the following conditions are met for about 1 second:
|
||
|
Diagnosis delay time |
-- |
||