DTC Detection Logic

NOTE:

If DTC B2602 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Description .
If DTC B2602 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC Description .

DTC No.	CONSULT screen terms (Trouble diagnosis content)	DTC Detection Condition
B2602	SHIFT POSITION	Diagnosis condition	When the ignition switch is ON.
		Signal (terminal)	--
		Threshold	BCM detects the following status for 10 seconds: Selector lever is in the P (Park) position Vehicle speed is 4 km/h (2.5 MPH) or more Ignition switch is in the ON position
		Diagnosis delay time	--