DTC Detection Logic

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P0340

CMP SEN/CIRC-B1

(Camshaft position Sensor "A" circuit bank 1)

1

Diagnosis condition

• Start engine and let it idle
• Start engine and maintaining engine speed at more than 800 RPM

Signal (terminal)

Voltage signal transmitted from Camshaft position Sensor (PHASE) to ECM

Threshold

The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking

Diagnosis delay time

--

2

Diagnosis condition

• Start engine and let it idle
• Start engine and maintaining engine speed at more than 800 RPM

Signal (terminal)

Voltage signal transmitted from Camshaft position Sensor (PHASE) to ECM

Threshold

The cylinder No. signal is not sent to ECM during engine running

Diagnosis delay time

--

3

Diagnosis condition

• Start engine and let it idle
• Start engine and maintaining engine speed at more than 800 RPM

Signal (terminal)

Voltage signal transmitted from Camshaft position Sensor (PHASE) to ECM

Threshold

The cylinder No. signal is not in the normal pattern during engine running

Diagnosis delay time

--

P0345

CMP SEN/CIRC-B2

(Camshaft position Sensor "A" circuit bank 2)

1

Diagnosis condition

• Start engine and let it idle
• Start engine and maintaining engine speed at more than 800 RPM

Signal (terminal)

Voltage signal transmitted from Camshaft position Sensor (PHASE) to ECM

Threshold

The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking

Diagnosis delay time

--

2

Diagnosis condition

• Start engine and let it idle
• Start engine and maintaining engine speed at more than 800 RPM

Signal (terminal)

Voltage signal transmitted from Camshaft position Sensor (PHASE) to ECM

Threshold

The cylinder No. signal is not sent to ECM during engine running

Diagnosis delay time

--

3

Diagnosis condition

• Start engine and let it idle
• Start engine and maintaining engine speed at more than 800 RPM

Signal (terminal)

Voltage signal transmitted from Camshaft position Sensor (PHASE) to ECM

Threshold

The cylinder No. signal is not in the normal pattern during engine running

Diagnosis delay time

--