DTC Detection Logic
The ECM monitors the switching frequency ratio of air fuel ratio (A/F) Sensor 1 and heated oxygen Sensor 2.
A three way catalyst (manifold) with high oxygen storage capacity will indicate a low switching frequency of heated oxygen Sensor 2. As oxygen storage capacity decreases, the heated oxygen Sensor 2 switching frequency will increase.
When the frequency ratio of A/F Sensor 1 and heated oxygen Sensor 2 approaches a specified limit value, the three way catalyst (manifold) malfunction is diagnosed.
- Three way catalyst (manifold) does not operate properly.
- Three way catalyst (manifold) does not have enough oxygen storage capacity.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|
P0420 |
TW CATALYST SYS-B1 (Catalyst system efficiency below threshold bank 1) |
1 |
Diagnosis condition |
-- |
|
Signal (terminal) |
-- |
|||
|
Threshold |
Three way catalyst (manifold) does not operate properly |
|||
|
Diagnosis delay time |
-- |
|||
|
2 |
Diagnosis condition |
-- |
||
|
Signal (terminal) |
-- |
|||
|
Threshold |
Three way catalyst (manifold) does not have enough oxygen storage capacity |
|||
|
Diagnosis delay time |
-- |
|||
|
P0430 |
TW CATALYST SYS-B2 (Catalyst system efficiency below threshold bank 2) |
1 |
Diagnosis condition |
-- |
|
Signal (terminal) |
-- |
|||
|
Threshold |
Three way catalyst (manifold) does not operate properly |
|||
|
Diagnosis delay time |
-- |
|||
|
2 |
Diagnosis condition |
-- |
||
|
Signal (terminal) |
-- |
|||
|
Threshold |
Three way catalyst (manifold) does not have enough oxygen storage capacity |
|||
|
Diagnosis delay time |
-- |
|||