DTC Detection Logic
- ECM does not control engine idle speed properly when engine is started with pre-warming up condition.
- The temperature of the catalyst inlet does not rise to the proper temperature when the engine is started with pre-warming up condition.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P050A |
COLD START CONTROL (Cold start idle air control system performance) |
Diagnosis condition |
-- |
|
Signal (terminal) |
-- |
||
|
Threshold |
ECM does not control engine idle speed properly when engine is started with pre-warming up condition |
||
|
Diagnosis delay time |
-- |
||
|
P050E |
COLD START CONTROL (Cold start engine exhaust temperature too low) |
Diagnosis condition |
-- |
|
Signal (terminal) |
-- |
||
|
Threshold |
The temperature of the catalyst inlet does not rise to the proper temperature when the engine is started with pre-warming up condition |
||
|
Diagnosis delay time |
-- |
||