Data Monitor

Monitor Item [Unit]	Main Signals	Description
MOTOR FAN REQ [1/2/3/4]	x	Indicates cooling fan speed signal received from ECM on CAN communication line
AC COMP REQ [On/Off]	x	Indicates A/C compressor request signal received from ECM on CAN communication line
TAIL&CLR REQ [On/Off]	x	Indicates position light request signal received from BCM on CAN communication line
HL LO REQ [On/Off]	x	Indicates low beam request signal received from BCM on CAN communication line
HL HI REQ [On/Off]	x	Indicates high beam request signal received from BCM on CAN communication line
FR FOG REQ [On/Off]	x	Indicates front fog light request signal received from BCM on CAN communication line
FR WIP REQ [Stop/1LOW/Low/Hi]	x	Indicates front wiper request signal received from BCM on CAN communication line
WIP AUTO STOP [STOP P/ACT P]	x	Indicates condition of front wiper auto stop signal
WIP PROT [Off/BLOCK]	x	Indicates condition of front wiper fail-safe operation
IGN RLY1 -REQ [On/Off]	Indicates ignition switch ON signal received from BCM on CAN communication line
IGN RLY [On/Off]	x	Indicates condition of ignition relay-1
PUSH SW [On/Off]	Indicates condition of push-button ignition switch
INTER/NP SW [On/Off]	Indicates condition of CVT shift position
ST RLY CONT [On/Off]	Indicates starter relay status signal received from BCM on CAN communication line
IHBT RLY -REQ [On/Off]	Indicates starter control relay signal received from BCM on CAN communication line
ST/INHI RLY [Off/ ST /INHI]	Indicates condition of starter relay and starter control relay
DETENT SW [On/Off]	Indicates condition of CVT shift selector (park position switch)
DTRL REQ [Off]	Indicates daytime running light request signal received from BCM on CAN communication line
HOOD SW	Indicates condition of hood switch
THFT HRN REQ [On/Off]	Indicates theft warning horn request signal received from BCM on CAN communication line
HORN CHIRP [On/Off]	Indicates horn reminder signal received from BCM on CAN communication line
HOOD SW 2	Indicates condition of hood switch 2