DTC Confirmation Procedure
- CHECK DTC PRIORITY
If DTC B2560 is displayed with DTC U1000 or U1010, first perform the trouble diagnosis for DTC U1000 or U1010.
Is applicable DTC detected?
YES
Perform diagnosis of applicable. U1000: Refer to DTC Description . U1010: Refer to DTC Description .
NO
GO TO 2 .
- PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
- Turn ignition switch ON under the following conditions and wait for at least 2 seconds:
- Selector lever is in the P or N position
- Do not depress brake pedal
- Check "Self diagnostic result" mode.
Is DTC detected?
YES
Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: Inspection End.
- Turn ignition switch ON under the following conditions and wait for at least 2 seconds: