Work Procedure

1. Park the vehicle on a level surface.
2. Adjust air pressure of all tires to the specified pressure. Refer to Tire .

GO TO 2 .

Was Decel G-Sensor removed or replaced?

YES

GO TO 3.

NO

GO TO 4.

Perform calibration of decel G sensor. Refer to Work Procedure (WITHOUT ICC), Work Procedure (WITH ICC).

GO TO 4.

With CONSULT

1. Turn ignition switch ON.
   CAUTION: Never start engine.
2. Select "Work Support" in "TRANSMISSION".
3. Select "G SENSOR CALIBRATION".
4. Touch "Start".
   CAUTION: Do not rock or jounce the vehicle during "G sensor calibration".

Is "COMPLETED" displayed?

YES

WORK END

NO

Perform steps 2 and 3 again.