CONSULT Function (BCM - INTELLIGENT KEY)
SELF DIAGNOSTIC RESULT
Refer to DTC Index .
DATA MONITOR
|
Monitor Item [Unit] |
Main |
Description |
|
REQ SW -DR [On/Off] |
X |
Indicates condition of door request switch LH. |
|
REQ SW -AS [On/Off] |
X |
Indicates condition of door request switch RH. |
|
REQ SW -BD/TR [On/Off] |
X |
Indicates condition of back door request switch. |
|
PUSH SW [On/Off] |
Indicates condition of push-button ignition switch. |
|
|
BRAKE SW 1 [On/Off] |
X |
Indicates condition of brake pedal position switch. |
|
BRAKE SW 2 [On/Off] |
Indicates condition of stop lamp switch. |
|
|
DETE/CANCL SW [On/Off] |
X |
Indicates condition of park position switch. |
|
PUSH SW -IPDM [On/Off] |
Indicates condition of push-button ignition switch received from IPDM E/R on CAN communication line. |
|
|
IGN RLY1 -F/B [On/Off] |
Indicates condition of ignition relay 1 received from IPDM E/R on CAN communication line. |
|
|
NEUTRAL SW -IPDM [On/Off] |
Indicates condition of transmission range switch received from IPDM E/R on CAN communication line. |
|
|
SFT PN -IPDM [On/Off] |
Indicates condition of P (park) or N (neutral) position from TCM on CAN communication line. |
|
|
STARTER RELAY -IPDM [On/Off] |
Indicates condition of starter relay received from IPDM E/R on CAN communication line. |
|
|
ENGINE STATE [STOP/START/CRANK/RUN] |
X |
Indicates condition of engine state from ECM on CAN communication line. |
|
ST/INH RELAY - IPDM [On/Off] |
Indicates condition of starter relay and starter control relay status signal from IPDM E/R. |
|
|
REVERSE SIGNAL -IPDM [On/Off] |
Indicates condition of transmission range switch received from IPDM E/R on CAN communication line. |
|
|
CRANKING PERMIT -ECM [PERMIT] |
Indicates condition of engine start possibility from ECM on CAN communication line. |
|
|
STARTER CUT RELAY -ECM [On/Off] |
Indicates condition of starter cut relay from ECM on CAN communication line. |
|
|
VEH SPEED 1 [mph/km/h] |
X |
Indicates condition of vehicle speed signal received from ABS on CAN communication line. |
|
VEH SPEED 2 [mph/km/h] |
X |
Indicates condition of vehicle speed signal received from combination meter on CAN communication line. |
|
IGN REQ -IPDM [On/Off] |
Indicates condition of ignition request from IPDM E/R on CAN communication line. |
|
|
STARTER REQ -IPDM [On/Off] |
Indicates condition of starter request received from IPDM E/R on CAN communication line. |
|
|
DOOR STAT -DR [LOCK/READY/UNLK] |
X |
Indicates condition of driver side door status. |
|
DOOR STAT -AS [LOCK/READY/UNLK] |
X |
Indicates condition of passenger side door status. |
|
DOOR STAT -RR [LOCK/READY/UNLK] |
X |
Indicates condition of rear right side door status. |
|
DOOR STAT -RL [LOCK/READY/UNLK] |
X |
Indicates condition of rear left side door status. |
|
BK DOOR STATE [LOCK/READY/UNLK] |
X |
Indicates condition of back door status. |
|
ID OK FLAG [Set/Reset] |
Indicates condition of Intelligent Key ID. |
|
|
PRMT ENG STRT [Set/Reset] |
Indicates condition of engine start possibility. |
|
|
PRMT RKE STRT [Set/Reset] |
Indicates condition of engine start possibility from Intelligent Key. |
|
|
I-KEY OK FLAG [Key ON/Key OFF] |
X |
Indicates condition of Intelligent Key OK flag. |
|
PRBT ENG STRT [Set/Reset] |
Indicates condition of engine start prohibit. |
|
|
ID AUTHENT CANCEL TIMER [STOP] |
Indicates condition of Intelligent Key ID authentication. |
|
|
ACC BATTERY SAVER [under a stop] |
Indicates condition of battery saver. |
|
|
CRNK PRBT TMR [On/Off] |
Indicates condition of crank prohibit timer. |
|
|
AUT CRANK TMR [On/Off] |
Indicates condition of automatic engine crank timer from Intelligent Key. |
|
|
CRNK PRBT TME [sec] |
Indicates condition of engine crank prohibit time. |
|
|
AUT CRANK TMR |
Indicates condition of automatic engine crank time from Intelligent Key. |
|
|
CRANKING TME [sec] |
Indicates condition of engine cranking time from Intelligent Key. |
|
|
RKE-LOCK [On/Off] |
Indicates condition of lock signal from Intelligent Key. |
|
|
RKE-UNLOCK [On/Off] |
Indicates condition of unlock signal from Intelligent Key. |
|
|
RKE-TR/BD [On/Off] |
Indicates condition of back door open signal from Intelligent Key. |
|
|
RKE-PANIC [On/Off] |
Indicates condition of panic signal from Intelligent Key. |
|
|
RKE-MODE CHG [On/Off] |
Indicates condition of mode change signal from Intelligent Key. |
|
|
RKE PBD [On/Off] |
Indicates condition of automatic back door signal from Intelligent Key. |
|
ACTIVE TEST
|
Test Item |
Description |
|
OUTSIDE BUZZER |
This test is able to check Intelligent Key warning buzzer operation [On/Off]. |
|
INSIDE BUZZER |
This test is able to check combination meter warning chime operation [Take Out/Knob/Key/Off]. |
|
INDICATOR |
This test is able to check combination meter warning lamp operation [KEY ON/KEY IND/Off]. |
|
FLASHER |
This test is able to check flasher operation [On/Off]. |
|
HORN |
This test is able to check horn operation [On/Off]. |
|
IGN CONT2 |
This test is able to check ignition relay-2 control operation [On/Off]. |
|
ENGINE SW ILLUMI |
This test is able to check push-button ignition switch START indicator operation [On/Off]. |
|
ENGINE START REQUEST |
This test is able to check BCM starter request switch signal to IPDM E/R via CAN communication [MODE 1/MODE 2/MODE 3/OFF]. |
|
IGNITION RELAY |
This test is able to check ignition relay operation [On/Off]. |
|
STARTER CUT RELAY |
This test is able to check the starter control relay [On/Off]. |
|
TRUNK/BACK DOOR |
This test is able to check back door actuator operation [Open]. |
|
AUTO ACC 2 |
This test is able to check BCM sends power supply to audio unit or NAVI control unit [On/Off]. |
|
AUTOMATIC BACK DOOR |
This test is able to check automatic back door operation [On/Off]. |
|
AUTO ACC 1 |
This test is able to check BCM sends power supply to ACC relay [MODE 1/MODE 2/MODE 3/OFF]. |
|
TRUNK LUGGAGE LAMP TEST |
This test is able to check luggage room lamp test operation [On/Off]. |
|
SHIFLOCK SORENOID TEST |
This test is able to check shift lock solenoid operation [On/Off]. |
WORK SUPPORT
|
Support Item |
Setting |
Description |
|
|
SHORT CRANKING OUTPUT |
Start |
70 msec |
Starter motor operation duration times. |
|
100 msec |
|||
|
200 msec |
|||
|
End |
- |
||
|
INSIDE ANT DIAGNOSIS |
- |
This function allows inside key antenna self-diagnosis. |
|
|
LOCK/UNLOCK BY I-KEY |
On* |
Door lock/unlock by I-Key ON. |
|
|
Off |
Door lock/unlock by I-Key OFF. |
||
|
AUTO LOCK SET |
Mode 1 |
OFF |
Auto door lock operation time can be changed in this mode. |
|
Mode 2 |
30 sec. |
||
|
Mode 3* |
1 min. |
||
|
Mode 4 |
2 min. |
||
|
Mode 5 |
3 min. |
||
|
Mode 6 |
4 min. |
||
|
Mode 7 |
5 min. |
||
|
IGN/ACC BATTERY SAVER |
On* |
Battery saver system ON. |
|
|
Off |
Battery saver system OFF. |
||
|
ENGINE START BY I-KEY |
On* |
Engine start function from Intelligent Key ON. |
|
|
Off |
Engine start function from Intelligent Key OFF. |
||
|
ANSWER BACK |
On |
Horn chirp reminder when doors are locked with Intelligent Key. |
|
|
Off* |
No horn chirp reminder when doors are locked with Intelligent Key. |
||
|
ANSWER BACK I-KEY LOCK UNLOCK |
BUZZER* |
Buzzer reminder function by door lock/unlock request switch ON. |
|
|
HORN |
Horn chirp reminder function by door lock request switch ON. |
||
|
Off |
No reminder function by door lock/unlock request switch. |
||
|
INVALID |
This mode is not used. |
||
|
ANSWERBACK KEYLESS LOCK UNLOCK |
On* |
Buzzer or horn chirp reminder when doors are locked/unlocked with Intelligent Key. |
|
|
Off |
No buzzer or horn chirp reminder when doors are locked/unlocked with Intelligent Key. |
||
|
REMOTE ENGINE STARTER |
On* |
Remote engine start function ON. |
|
|
Off |
Remote engine start function OFF. |
||