Work Procedure
- WRITING MODE SELECTION
CONSULT Configuration
Select "CONFIGURATION" of AVM.
When writing saved data
GO TO 2 .
When writing manually
GO TO 3 .
- PERFORM "WRITE CONFIGURATION - Config file"
Perform "WRITE CONFIGURATION - Config file".
Work End.
- PERFORM "MANUAL CONFIGURATION"
Select "MANUAL CONFIGURATION" to write vehicle specifications into the around view monitor control unit.
CAUTION:- Thoroughly read and understand the vehicle specification. Incorrect settings may result in abnormal control of ECU.
- Make sure to select "NEXT" even if the default settings displayed on the CONSULT are the desired settings. If "NEXT" is not selected, the configuration process will be incomplete.
NOTE: If manual configuration items are not displayed, touch "NEXT".GO TO 4 .
- OPERATION CHECK
Confirm that each function controlled by around view monitor control unit operates normally.
Work End.