LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2019 >> Rogue Sport SL, AWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System (DTCS) >> DTC Diagnosis >> EPS/DAST 3 (EPS Control Unit) >> DTC C1143: Steering Angle Sensor >> Confirmation Procedure >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. DTC REPRODUCTION PROCEDURE 

    SYMBOL With CONSULT

    1. Turn the ignition switch OFF to ON.
    2. Perform "EPS/DAST 3" self-diagnosis.

    Is DTC "C1143" detected?

    YES

    Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Inspection .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals