CONSULT Function (BCM - WIPER)
DATA MONITOR
|
Monitor Item [Unit] |
Description |
|
IGN ON SW [On/Off] |
Indicates condition of ignition switch ON position. |
|
IGN SW CAN [On/Off] |
Indicates ignition switch ON signal received from IPDM E/R on CAN communication line. |
|
FR WIPER HI [On/Off] |
Indicates condition of wiper operation of combination switch. |
|
FR WIPER LOW [On/Off] |
|
|
FR WIPER INT [On/Off] |
|
|
FR WASHER SW [On/Off] |
|
|
INT VOLUME [1 - 7] |
Indicates condition of intermittent wiper operation of combination switch. |
|
FR WIPER STOP [On/Off] |
Indicates front wiper auto stop signal received from IPDM E/R on CAN communication line. |
|
REVERSE SW CAN [On/Off] |
Indicates reverse switch signal received from TCM on CAN communication line. |
|
VEHICLE SPEED [km/h/mph] |
Indicates vehicle speed signal received from combination meter on CAN communication line. |
ACTIVE TEST
|
Test Item |
Description |
|
FR WIPER |
This test is able to check front wiper operation [INT/Lo/Hi/Off]. |
WORK SUPPORT
|
Support Item |
Setting |
Description |
|
WIPER SPEED SETTING |
On |
Front wiper intermittent time linked with vehicle speed and wiper dial position. |
|
Off* |
Front wiper intermittent time linked with wiper dial position. |
* : Initial setting