Malfunction Indicator lamp (MIL)
WARNING: This page is about a different variant/trim than selected.
Malfunction Indicator lamp (MIL) is located on the combination meter.
MIL will illuminate when the ignition switch is turned ON without the engine running. This is a bulb check.
When the engine is started, MIL should turn OFF. If the MIL remains illuminated, the on board diagnostic system has detected an engine system malfunction.
For details, refer to Malfunction Indicator Lamp (MIL) .
Control modules that a DTC of MIL ON/Blink is stored (Control module varies among DTCs.):
- ECM
- TCM