Values on the Diagnosis Tool
|
Monitor item |
Condition |
Value/Status |
|
|
MAIN SW |
Ignition switch ON |
When MAIN (ON/OFF) switch is pressed. |
On |
|
When MAIN (ON/OFF) switch is not pressed. |
Off |
||
|
SET/COAST SW |
Ignition switch ON |
When SET/COAST switch is pressed. |
On |
|
When SET/COAST switch is not pressed. |
Off |
||
|
CANCEL SW |
Ignition switch ON |
When CANCEL switch is pressed. |
On |
|
When CANCEL switch is not pressed. |
Off |
||
|
RESUME/ACC SW |
Ignition switch ON |
When RESUME/ACCELERATE switch is pressed. |
On |
|
When RESUME/ACCELERATE switch is not pressed. |
Off |
||
|
DISTANCE SW |
Ignition switch ON |
When DISTANCE switch is pressed. |
On |
|
When DISTANCE switch is not pressed. |
Off |
||
|
CRUISE OPE |
Drive the vehicle and activate the ICC system |
When ICC system is controlling. |
On |
|
When ICC system is not controlling. |
Off |
||
|
BRAKE SW |
Ignition switch ON |
When brake pedal is depressed. |
Off |
|
When brake pedal is not depressed. |
On |
||
|
STOP LAMP SW |
Ignition switch ON |
When brake pedal is depressed. |
On |
|
When brake pedal is not depressed. |
Off |
||
|
IDLE SW |
Engine running |
Idling |
On |
|
Except idling (depress accelerator pedal) |
Off |
||
|
SET DISTANCE |
|
When set to "long" |
Long |
|
When set to "middle" |
Mid |
||
|
When set to "short" |
Short |
||
|
CRUISE LAMP |
Start the engine and press MAIN switch |
ICC system ON (MAIN switch indicator ON). |
On |
|
ICC system OFF (MAIN switch indicator OFF). |
Off |
||
|
VHCL AHEAD |
Drive the vehicle and activate the ICC system |
When a vehicle ahead is detected (vehicle ahead detection indicator ON). |
On |
|
When a vehicle ahead is not detected (vehicle ahead detection indicator OFF). |
Off |
||
|
ICC WARNING |
Start the engine and press MAIN switch |
When ICC system is malfunctioning (ICC system malfunction ON). |
On |
|
When ICC system is normal (ICC system malfunction OFF). |
Off |
||
|
VHCL SPEED SE |
While driving |
Displays the vehicle speed calculated by ADAS control unit |
|
|
SET VHCL SPD |
While driving |
When vehicle speed is set. |
Displays the set vehicle speed |
|
BUZZER O/P |
Engine running |
When the buzzer of the following system operates:
|
On |
|
When the buzzer of the following system does not operate:
|
Off |
||
|
THRTL SENSOR |
Engine running and depress accelerator pedal |
Displays the throttle position |
|
|
ENGINE RPM |
Engine running |
Equivalent to tachometer reading |
|
|
PRESS ORDER |
Engine running |
- |
|
|
WIPER SW |
Ignition switch ON |
Wiper not operating. |
Off |
|
Wiper LO operation. |
Low |
||
|
Wiper HI operation. |
High |
||
|
YAW RATE |
While driving |
Vehicle stopped. |
0.0 |
|
Vehicle turning left. |
Negative value |
||
|
Vehicle turning right. |
Positive value |
||
|
BA WARNING |
Engine running |
AEB OFF indicator lamp ON.
|
On |
|
AEB OFF indicator lamp OFF.
|
Off |
||
|
STP LMP DRIVE |
Drive the vehicle and activate the ICC system |
When ICC brake hold relay is activated. |
On |
|
When ICC brake hold relay is not activated. |
Off |
||
|
D POSITION SW |
Engine running |
When the shift selector is in "D" position or manual mode. |
On |
|
When the shift selector is in any position other than "D" or manual mode. |
Off |
||
|
NP RANGE SW |
Engine running |
When the shift selector is in "N" or "P" position. |
On |
|
When the shift selector is in any position other than "N" or "P". |
Off |
||
|
PKB SW |
Ignition switch ON |
When the parking brake is applied. |
On |
|
When the parking brake is released. |
Off |
||
|
PWR SUP MONI |
Engine running |
Power supply voltage value of ADAS control unit |
|
|
VHCL SPD AT |
While driving |
Value of CVT vehicle speed sensor signal |
|
|
THRTL OPENING |
Engine running |
Depress accelerator pedal. |
Displays the throttle position |
|
GEAR |
While driving |
Displays the gear position |
|
|
NP SW SIG |
Ignition switch ON |
When the shift selector is in neutral position. |
On |
|
When the shift selector is in any position other than neutral. |
Off |
||
|
MODE SIG |
Start the engine and press MAIN switch |
When ICC system is deactivated. |
Off |
|
When ICC system is activated. |
ICC |
||
|
SET DISP IND |
Press SET/COAST switch |
SET switch indicator ON. |
On |
|
SET switch indicator OFF. |
Off |
||
|
DISTANCE |
Drive the vehicle and activate the ICC system |
When a vehicle ahead is detected. |
Displays the distance from the preceding vehicle |
|
When a vehicle ahead is not detected. |
0.0 |
||
|
RELATIVE SPD |
Drive the vehicle and activate the ICC system |
When a vehicle ahead is detected. |
Displays the relative speed. |
|
When a vehicle ahead is not detected. |
0.0 |
||
|
FCW SYSTEM ON |
Ignition switch ON |
When the AEB system is ON. |
On |
|
When the AEB system is OFF. |
Off |
||
|
BUZZEROUTPUT |
Drive the vehicle and activate the Blind Spot Warning system |
When the buzzer of the following system operates.
|
On |
|
When the buzzer of the following system dose not operate.
|
Off |
||
|
SIDE G |
While driving |
Vehicle turning right. |
Negative value |
|
Vehicle turning left. |
Positive value |
||
|
FUNC ITEM(FCW) |
Engine running |
On |
|
|
FUNC ITEM(BSW) |
Engine running |
On |
|
|
FCW SELECT |
Ignition switch ON |
"Automatic Emergency Braking" set when the integral switch is ON. |
On |
|
"Automatic Emergency Braking" set when the integral switch is OFF. |
Off |
||
|
BSW SELECT |
Ignition switch ON |
"Blind Spot Warning" set when the integral switch is ON. |
On |
|
"Blind Spot Warning" set when the integral switch is OFF. |
Off |
||
|
BSW/BSI WARN LMP |
Engine running |
When the BSW system is malfunctioning. |
On |
|
When the BSW system is normal. |
Off |
||
|
BSW WARN LMP |
Engine running |
When the BSW system is malfunctioning. |
On |
|
When the BSW system is normal. |
Off |
||
|
BSI/BSW |
Ignition switch ON |
When the BSW system is ON |
On |
|
When the BSW system is OFF |
Off |
||
|
BSW SYSTEM ON |
Ignition switch ON |
When the BSW system is ON. |
On |
|
When the BSW system is OFF. |
Off |
||
|
SYSTEM CANCEL MESSAGE |
Engine running |
System cancel display ON. |
On |
|
System cancel display OFF. |
Off |
||
|
BSW ON INDICATOR |
Engine running |
BSW system display ON. |
On |
|
BSW system display OFF. |
Off |
||
|
SIDE RADAR BLOCK COND |
Engine running |
Front bumper or side radar is dirty. |
On |
|
Front bumper and side radar are clean. |
Off |
||
|
BSW IND BRIGHTNESS |
Ignition switch ON |
BSW system OFF. |
Nothing |
|
Blind Spot Warning indicator brightness bright. |
Bright |
||
|
Blind Spot Warning indicator brightness normal. |
Normal |
||
|
Blind Spot Warning indicator brightness dark. |
Dark |
||
|
FEB AVAILABLE COND |
Engine running |
When the AEB system is available condition. |
On |
|
When the AEB system is not available condition. |
Off |
||