Diagnosis Procedure (M/T Models)

Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.

Is DTC detected?

YES

Perform the trouble diagnosis related to the detected DTC. Refer to DTC Index .

NO

GO TO 2 .

1. Turn ignition switch OFF.
2. Disconnect clutch interlock switch connector.
3. Disconnect IPDM E/R connector.
4. Check continuity between clutch interlock switch harness connector and IPDM E/R harness connector.

   Clutch interlock switch		IPDM E/R		Continuity
   Connector	Terminal	Connector	Terminal
   E34	2	E43	4	Yes

5. Check continuity between clutch interlock switch harness connector and ground.

   Clutch interlock switch		Ground	Continuity
   Connector	Terminal
   E34	2		No

Is the inspection result normal?

YES

Replace IPDM E/R. Refer to Removal and Installation .

NO

Repair or replace harness.