Component Function Check

Turn ignition switch to START.

Is any cylinder ignited?

YES

GO TO 2 .

NO

Proceed to Diagnosis Procedure .

With CONSULT

1. Start engine.
2. Perform "POWER BALANCE" in "ACTIVE TEST" mode of "ENGINE" using CONSULT.
3. Check that each circuit produces a momentary engine speed drop.

Without CONSULT

1. Let engine idle.
2. Listen to each fuel injector operating sound.

   Courtesy of NISSAN NORTH AMERICA, INC.

   Clicking noise should be heard.

Is the inspection result normal?

YES

INSPECTION END

NO

Proceed to Diagnosis Procedure .