Active Test

Test Item

Description

INTELLIGENT KEY LINK (CAN)

This test is able to check Intelligent Key identification number [Off/ID No1/ID No2/ID No3/ID No4/ID No5].

INT LAMP

This test is able to check interior room lamp operation [On/Off].

FLASHER

This test is able to check hazard lamp operation [LH/RH/Off].

HORN

This test is able to check horn operation [On].

BATTERY SAVER

This test is able to check battery saver operation [On/Off].

OUTSIDE BUZZER

This test is able to check Intelligent Key warning buzzer operation [On/Off].

INSIDE BUZZER

This test is able to check combination meter warning chime operation [Take Out/Knob/Key/Off].

INDICATOR

This test is able to check combination meter warning lamp operation [KEY ON/KEY IND/Off].

IGN CONT2

This test is able to check ignition relay-2 control operation [On/Off].

ENGINE SW ILLUMI

This test is able to check push-button ignition switch START indicator operation [On/Off].

PUSH SWITCH INDICATOR

This test is able to check push-button ignition switch indicator operation [On/Off].

ACC CONT

This test is able to check accessory relay control operation [On/Off].

IGN CONT1

This test is able to check ignition relay-1 control operation [On/Off].

ST CONT LOW

This test is able to check starter control relay operation [On/Off].

IGNITION RELAY

This test is able to check ignition relay operation [On/Off].

TRUNK/LUGGAGE LAMP TEST

This test is able to check cargo lamp illumination operation [On/Off].

KEYFOB P/W TEST

This test is able to check power window operation using the Intelligent Key [P/W up/down OFF/Send P/W down ON/Send P/W up ON].

SHIFTLOCK SOLENOID TEST

This test is able to check shift lock solenoid operation [On/Off].