|
P0365
|
CMP SEN/CIRC-B1
(Camshaft position sensor circuit bank 1)
|
- Exhaust valve timing control position sensor signal is not sent to ECM during engine cranking.
- Exhaust valve timing control position sensor signal is not sent to ECM during engine running.
- The pulse signal sent from the Exhaust valve timing control position sensor to ECM is not in the normal pattern during engine running.
|
- Harness or connectors
- Exhaust valve timing control position sensor circuit is open or shorted.
- Exhaust valve timing control position sensor
- Exhaust camshaft
- Starter motor
- Starting circuit
- Battery deterioration
- Sensor power supply 1 circuit sensors
|