April 5, 2026: LEMON Manuals is launched! Read the announcement.

CONSULT Function (BCM - COMMON ITEM)

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with BCM.

Direct Diagnostic Mode	Description
ECU Identification	The BCM part number is displayed.
Self Diagnostic Result	The BCM self diagnostic results are displayed.
Data Monitor	The BCM input/output data is displayed in real time.
Active Test	The BCM activates outputs to test components.
Work support	The settings for BCM functions can be changed.
Configuration	The vehicle specification can be read and saved. The vehicle specification can be written when replacing BCM.
CAN DIAG SUPPORT MNTR	The result of transmit/receive diagnosis of CAN communication is displayed.

SYSTEM APPLICATION

BCM can perform the following functions.

System	Sub System	Direct Diagnostic Mode
System	Sub System	ECU Identification	Self Diagnostic Result	Data Monitor	Active Test	Work support	Configuration	CAN DIAG SUPPORT MNTR
Door lock	DOOR LOCK	X			X	X
Rear window defogger	REAR DEFOGGER	X			X
Warning chime	BUZZER	X			X
Interior room lamp timer	INT LAMP	X			X	X
Exterior lamp	HEAD LAMP	X			X	X
Wiper and washer	WIPER	X			X	X
Turn signal and hazard warning lamps	FLASHER	X			X	X
Air conditioner	AIR CONDITIONER	X			X
Intelligent Key system	INTELLIGENT KEY	X			X	X	X
Combination switch	COMB SW	X
BCM	BCM	X	X	X					X	X
Immobilizer	IMMU	X			X	X	X
Interior room lamp battery saver	BATTERY SAVER	X			X	X
Vehicle security system	THEFT ALM	X			X
RAP system	RETAINED PWR	X
Signal buffer system	SIGNAL BUFFER	X
TPMS	AIR PRESSURE MONITOR	X			X	X	X