Work Procedure

SAVING VEHICLE SPECIFICATION
CONSULT Configuration

Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to Description .

NOTE: If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.

GO TO 2 .
REPLACE BCM
Replace BCM. Refer to Removal and Installation .

GO TO 3 .
WRITING VEHICLE SPECIFICATION
CONSULT Configuration

Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to Work Procedure .

GO TO 4 .
REGISTER INTELLIGENT KEYS
For initialization and registration of Intelligent Keys, refer to CONSULT immobilizer mode and follow the on-screen instructions.

WORK END