Application Items

CONSULT can display each diagnostic item using the diagnostic test modes shown in the following service information.

Diagnosis mode	CGW Status			Description
Diagnosis mode	Restricted Mode	Diag Test Mode	Open Mode	Description
Self Diagnostic Result	Display	Display	Display	Display non-network DTC which EPS control unit memorizes
CGW Information	Display	Display	Display	Display the current CGW mode Enables CGW to switch mode
Data Monitor	Display	Display	Display	Displays EPS control unit input/output data in real time
ECU Identification	Display	Display	Display	Displays EPS control unit part number
Configuration	Display	Display	Display	The vehicle specification that is written in EPS control unit can be displayed or stored The vehicle specification can be written when EPS control unit is replaced
Network-DTC	Display	Display	Display	Display network DTC which EPS control unit memorizes when performing "Diagnosis (All System)".
CAN Diag Support Monitor^*	Display	Display	Display	NOTE: The mode is indicated, but not monitored

*: Displays when performing "Diagnosis (All System)".